Engraving practice plates Examples Add comments Feb 102015 Here are a number of my practice plates – they represent most of the practice I have done – there are probably at most half a dozen very early ones that are too bad to contemplate! Click below to see more practice plates…… 2 Responses to “Engraving practice plates” Dave Allan says: 25/09/2015 at 7:51 pm I own several P53 and sniders all ex military, is it possible to enhance or re-engrave lock plates where the original markings have been polished to the White. Thanks Dave! Reply admin says: 27/09/2015 at 12:09 am Dear Dave, Thanks for your email. Without seeing them it is difficult to give a definite answer, but I would guess that it would not be a good idea. Most of the military markings by this date were stamped not engraved, so it wouldn’t look right if they were replaced by engraving, or obviously enhanced. It depends what outcome you are seeking and the condition of the gun:- it is unlikely to look authentic, and so probably won’t add value and may reduce it, but if you just fancy it then that is your choice. If the gun has little intrinsic value there is little to loose but engraving is not cheap! Technically the lock plate would need to be annealed before engraving, and then rehardened afterwards. I’m not a good person to do military style stuff as its not something I know much about, although I do have a 2 band and a 3 band ’53. Hope this helps – email me again if there is anything else I can suggest – send a pic or two… see contact tab. Tim Reply Leave a Reply to admin Cancel reply Your Comment You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong> Name (required) E-mail (required) URI This site uses Akismet to reduce spam. Learn how your comment data is processed.