May 092017
 


IMPORTANT NOTICE

This site contains details of what I do – it does not mean that it is safe or legal for you to do the same, and I accept no responsibility if you do.  You are responsible for ensuring that what you do is within your capabilities and is safe and legal in your country.    Guns, even antiques, can be dangerous and if you don’t know what you are doing get expert help.  Many antique guns are of historic and/or financial value, and its your responsibility to find out if what you want to do will damage their value.  Remember, leaving them as they are won’t diminish their value  but inappropriate repair might well make them worth less, maybe much less!  If in doubt don’t do it.

______________________________________________________

I assume he is holding the sling out of the way with his left hand?  from  Ezakial Baker’s Practice etc..

Find your way around – There is a MENU of PAGES  used for fixed items along the top of the screen.

All the regular POSTS are in the HOME page – use the menus on the right to jump to whichever POST  you want, or the MENU below the header  will show you POSTS that are relevant to the given subject  and the top menu on the right will keep you up to date with changes…

Welcome to my site – you’ll find this post is a sort of diary where I put things I’m doing that are (almost) relevant to the subject – they ‘fall off the bottom’ after a few weeks – bits from the diary may get put into existing or new posts when they fall off.  Please feel free to contact me via the comments box in each post or by my email as per the CONTACT tab at the top.  If I can I will  respond – email will usually get a quicker response. I am fond of obscure English sayings which are marked* – you can look them up on Google if you  need to interpret them.

PHOTOGRAPHS:   Most of the photos on this website are mine, a few are from other sources or are photographed from books.   My photos are copyright – you are welcome to use them for your own purposes, but not for gain – please always attribute them to cablesfarm.co.uk.   All my photos have been reduced in resolution using photoscape (excellent & free) to save space on the website, they are normally 1200 pixels wide, occasionally 1600 for more interesting things.   The image you will normally see on your screen is at a lower resolution still, as wordpress fits it to the page and decreases the resolution very considerably to speed up loading.  Clicking on any photo will show you the full  1200 or 1600 width version if your screen resolution allows it – they are very much clearer.   All the photos were originally taken at much higher resolution – up to 6000 pixels wide –  if you want a higher resolution version of any of the photos e.g. for publication, please contact me with details and we can if necessary discuss copyright and I can forward  full resolution copies.   For serious research publications I am happy to take new photos of guns I have access to.  If you right click & ‘save image’ from the normal web page you will get an image of (for the J LANG 14 bore for example) 94 KBytes, if you left click on the image and download from the larger image that comes up on a blank screen you’ll get about 573 KBytes, which is what I uploaded to the website  –  if I send you the original cropped image it is 8.257 MBytes  with a horizontal count of 5885 pixels !

  So now you know why the photos in the normal view look a bit murky!  Just click on them for a better photo.

___________________ DIARY ______________________

21st August – A number of irrelevant struggles today!  Last night I read an interesting bit in Bosworth’s 1848 book (see yesterday) concerning the construction of ordinance and the strengths of various metals. Interestingly he says brass, which he specifies as an alloy of tin and copper that we would now call bronze, brass being the name we now give to predominantly copper – zinc alloys, is twice as strong as wrought iron or cast steel!  Talking of ordinance (cannon) he says that wrought iron is seldom used as  it is not very strong, and that cast steel forms  large, weak crystals when used in large masses as it cools slowly (can be true but is not the full story).  Its quite interesting to see how a lack of understanding of the crystal structure of iron/carbon solutions with face or body centered carbon atoms and cementine led them to ‘invent ‘ all sorts of explanations for   the hardening and tempering processes.  One piece of information that was completely new to me concerned very large ordinance – cannon with bore over 2 feet – used in Constantinople (now Istanbul) overlooking the Bosporus waterway against ships passing through or attacking the city.  It was virtually impossible to hit the ships by judging the trajectory – presumably the powder was not consistent enough to get repeatability – and the breech pressures with iron balls was too high for any barrel material known at the time, so as in very ancient times they used carefully worked stone balls.  The use of such a relatively light ball enabled them to fire the cannons more or less parallel to the water surface and let them bounce along the water  like a skimming stone thrown on the beach, thus relieving them of the necessity to get the elevation right – they just had to point the guns in the right horizontal direction!  Apparently this led to high kill rates –  it must have been terrifying watching a massive ball skimming across the water towards your ship. Shades of Barnes Wallis and the Dam Busters, only 100 years earlier –  I don’t suppose he had read Bosworth’s book!  I’m tempted to find a nice pond and try firing marbles along the surface- I wonder if I have a suitable marble-bore smoothbore gun – A couple of wads and a very light powder charge might work – I would of course need a model ship to make the experiment realistic ( and put the gun on a Sect 1 firearms certificate)!

This blog is getting a steady stream of visitors – around 220 per day quite consistently – which is gratifying, and I get a number of appreciative emails, usually with an interesting question attached – like the recent one asking if it was possible to resurrect a fine deactivated shotgun as an obsolete calibre rifle – I think the answer was that it would in all probability strictly speaking end up as a section 1 firearm, although if  all the parts used were pre 1939 it might possibly qualify as a section 58(2) obsolete calibre.  Even if it was initially it was a Section 1 by virtue of the re-modelling, if it was indistinguishable from an original and essentially pre 1939 it is difficult to see how it couldn’t subsequently revert to Section 58, possibly via a Registered Firearms Dealer.  I did discover that you can take any gun to the proof house and bring it back as a section 58 firearm – i.e. without it being on a firearms certificate.   In truth a lot of the aspects of firearms law are a bit woolly where antiques are concerned – the difference between say a .577 Enfield rifle kept as an ‘ornament’ or ‘curio’ and one kept with the ‘intention’ to shoot is clearly all in the mind – the first is  section 58(2) and can be freely kept and displayed (as long as I don’t have a criminal conviction) but the second is a section 1 firearm and I can get a mandatory prison sentence for having it without putting it on my certificate, and it has to be locked away!  What is more, I think I  can swap it back and forth, and in theory leave the slot for it on my certificate even when I’ve reverted  it to my collection at section 58 as long as I notify them each time, although I don’t think that would make me very popular.   What about intending ‘one day’ to shoot my section 58(2) Gibbs-Farquerson falling block rifle (Obsolete calibre – Gibbs No 2)?  It all points to the need for us to join both the MLAGB and BASC,  who work hard to protect our sport.

20th August – In the course of redecorating I had to move a bookcase full of miscellaneous books and as part of an ongoing de-cluttering process I have been sorting out some of the old books I have acquired from my father and other places and taking carrier bags full to Oxfam.  I am building a pretty comprehensive library of gun books – some inherited but a lot purchased at considerable expense and am always on the lookout for anything original.  As you can see from the picture above, one of my treasures is an original hand coloured copy of Ezakail Baker’s  handbook for the rifle at about the time of the first rifle regiments (see post Ezakail Baker’s Practice &c ….).  In my hunting upstairs earlier today I came across a copy of the ‘Text Book for Officers at Schools of Musketry’ revised in 1868, which covers theory of rifling and trajectory as known at that date plus how the ordinance made gunpowder – it appears to be concerned only with military muzzle loaders – mainly the Enfield.  A similar and slightly earlier book that I have in an old facsimile copy is ‘A Treatise on The Rifle, Musket, Pistol and Fowling Pieces’ by N Bosworth, originally published in 1848 – it is a pretty comprehensive treatise on almost random aspects of  guns, from refraction of light to the strengths of different kinds of tin – another interesting read…… While taking the books to Oxfam I stopped to browse their stock of old books and picked up a copy of ‘He Carried a Six Shooter’ by Stuart N Lake – the biography of Wyatt Earp  – it cost me £7.99 so it better be good – I’m saving it for holiday reading!  On the subject of books I am currently reading an original copy of  ‘Field,Cover and Trap Shooting’ by A.H.Bogardus – the champion wing shot of the world (and originator of the glass ball trap) – as he described himself. Published in 1878 it covers the transition from muzzle loader to breech loader. The bags he shot, almost none of which were driven shoots, are mind boggling to us now and he did it daily for years!  Another old book that is from a different age I am also reading is ‘The Sportsman’s Handbook of Practical Collecting Preserving and Artistic Setting Up … by Roland Ward – one of the most famous taxidermists ever, published in 1890!  Again it is so out of kilter with the modern age, although not as much as some of the older hunting books that describe Africa before loss of habitat and  over hunting  destroyed most of the big game.   Having written this paragraph I’m struck by how long book non-fiction titles were in the 19th century  – almost an essay in themselves.   Just to show that I’m not stuck in some Victorian swamp, I am also reading, or to be honest, struggling to read a very recent book – ‘Gun Culture in Early Modern England’ by Lois G Schwoerer, which SHOULD be an interesting book.  Unfortunately reading it is a bit like wading through treacle- English is not Schwoerer’s first language and he doesn’t know much about guns, neither of which are conducive to an easy read. Add the fact that it was clearly originally a thesis ( You can tell by the title – Early Modern is a term exclusively used in the history trade!)  and seems to have dispensed with the services of a copy editor, or indeed any kind of editor. Shame really as I’m sure there is a lot of good work if only I could see through the lack of logical order and the repetition.  I might have another try, it should at least be good for sending me to sleep, not that that is a problem I normally have, if only I didn’t find it so annoying………….

19th August – I’m not sure what I had in mind for tonight, but I got sidetracked by an email asking about a complex problem related to deactivated guns and obsolete calibres that had me reading through the Home Office Guidance on Firearms Licensing 2016, which effectively filled the hour I set aside.  It makes fascinating reading, particularly some of the illogicalities of the law  – for instance the occupier of land, including those who have shooting rights, can lend a shotgun to a non-certificate holder to shoot in his presence on the occupied land but only in person, whereas in the case of a rifle he or his servant can lend the rifle!  Anyway I found the information I was looking for – obsolete calibre firearms must have been made before 1939 to count for section 58(2).  The Acts are full of assorted cut off dates that probably have logical relationships to gun development, but they are not always obvious – as another example, you can make an inert gun with only relatively simple safeguards against making it shootable as long as its a replica of a gun made before 1870.  And then there is the section 7 cutoff of 1918, or so I believe – I must look into that…….  I have put the two most useful Home Office Guides on the bottom of the LINKS page,  Guidance on Firearms Licensing,  and Firearms Security Handbook  – they are both the definitive guidance issued to police and trump anything else you are told – until it changes!   see LINK tab at the top of this page.

18th August – Finished the decorating – I tried to get a local firm that matches paint colours to do me a Farrow and Ball colour but they didn’t get anywhere near so I left them with 2 litres of a failed attempt and went and bought the real thing at exorbitant price!   I always used to mix my own colours but I’ve got lazy and want to use colours out of a tin – the only trouble is that I don’t actually like the result that much!  I have dozens of tins that are not the colour on the label but are never the colour one wants now, or if its the right colour its not the right type of paint….   I did a little bit of engraving – literally!  I had another go at engraving round the edge of a 1p coin – its quite a big space – have a look at one.   I might try getting two rows of lettering on the edge next time but the copper is a bit soft for the finest work.  I’ll try to get some photos but it will involve setting up my microscope camera and I’ve probably forgotten all its little foibles!

17th August – Distempered the landing ceiling and walls – so my shoulders ache!  I had another gun to repair today – another 12 bore hammer gun that had a broken spur that pushes the extractors out then the gun is opened – on this gun it was filed up as part of the action flat so not a replaceable part. As in so many of these repairs, this was a re-repair of a brazed or hard soldered repair from the past.  They are always more of a pain than a straight weld of a fracture because you have to get rid of all the  foreign material before you can weld, and that invariably means that the close fit between the parts is lost and you have to make a guess at the exact alignment and find a way of holding it in place.  I tried holding the parts together with Plasticine but it had to be too close to the heat and didn’t work – its a difficult weld because the action flat side of the break is a massive heat sink, and the bit has no thermal inertia, so the bit gets red hot almost instantly at least until it has some weld connection to the main part.  Anyway I managed to jig it up and put on a bit of weld – I was using piano wire as a rod, to get a bit of carbon into the weld, but the danger is that you will let it cool too quickly and then it is too hard to file.  – Anyway after a bit of fiddling I got enough weld around it to look strong enough for the job and managed to tame the hard bit – it was then a case of filing it to fit and checking that it moved the extractor but also let it go right back in as the barrels came to the face.  That was all working nicely, but the fore – end didn’t fit and needed a bit more taken off the sides of the spur and general tidying up of the hinge area before the gun would open and close easily – I guess in total it took a couple of hours to get right – mostly because I am not a very expert welder and haven’t done that job before……  Here are some pics;-

The ‘spur’ had been brazed on but failed, so the joint had to be cleaned of brazing.

Finding a way of holding the parts in the correct alignment was a bit of a fiddle, but worked in the end…

I should point out that this is a fairly basic but decent working gun – I wouldn’t trust myself to do the same on a quality gun – I’d leave it to Jason..!

It’s nice to have photos coming out without the pink tinge!

 

16th August. Just got back from a trip into deepest Norfolk for a North Norfolk Music Festival performance of Walton’s Facade at South Creake Church – Brilliant, one of my favourite pieces of music – a good friend was playing trumpet.  That’s our bit of culture for the summer!  I went to see Dick today to give him the Steven Grant to store until collection.  He was giving me a lesson on ejector mechanisms, including a neat little box of tricks designed by Westley Richards, a genius a slightly off beat inventions.   He is working on a Purdy style ejector on a pretty little double .410 – I’ll take my camera over next week and get s few pictures.

15th August.  I had a visit from a fellow AML shooter with a 12 bore hammer gun (rebounding Stanton patent of 1866 locks, triple bite top lever action) with the rear trigger snapped off, with the bit in a bag.  I prefer not to keep other people’s breech loaders for longer than necessary, and then I take them to an RFD for storage as I’m not one myself, although as things are going that may become necessary. In this case I figured I should be able to do a ‘ while you wait’ repair myself, and only keep the gun if I failed!  I stripped out the broken trigger blade and clamped it to a slab of steel and positioned the broken bit with Plasticine while I tacked the sides of the break, then filed a deep ‘V’ across the face and fill welded it with piano wire as the welding rod.  All very satisfactory and not too much metal to file off  and it didn’t get hardened too much to file down and polish on the fibre wheel.  A quick flash with the fine oxygas flame to put a bit of colour into it and pop it all together, removing the caked grease and cleaning the rust off the trigger guard back and recess in the stock – all done in an hour or so and ready to go.  Plasticine is, as I may have mentioned, the precision welder’s best friend – it holds bits in position and doesn’t move when it gets hot – it is more or less a mixture of dried clay and Vaseline or something like that, and if it gets very hot the Vaseline evaporates and the clay remains in position, but usually the tack welding has been done by then.  As promised, I did take the locks off the LePage pistol to investigate the single trigger mechanism, but unfortunately I couldn’t get a stud out without damaging it and so couldn’t expose the mechanism well enough to photograph fully, so you will have to make do with a verbal description…   The trigger has a vertical axle sticking out of the top.  pivoting on this axle is a blade the longer  back part of which forms the trigger blade – It sits below the conventional sears and can swing to be under either the left or the right sear. a spring biases it to sit under the left sear.  An extension of the blade in front of the axle carries a stud that sticks out on the right hand side of the blade.  A cam slope on the tumbler of the right hand lock pushes the stud when the right hand lock is fully cocked, causing the blade to swing its front to the left and its back section to the right so that it sits under the right hand sear, at which point pulling the trigger  fires the right hand lock which fires the front charge.  If the right hand lock is not on full cock the blade always sits under the left hand sear and that lock will fire if it is cocked.  I noticed that if both cocks are on half cock the left cock will fire if the trigger is pulled – the half cock bent does not appear to be of re-entrant shape as you can see from the photograph.

Showing the stud in the blade in front of the pivot. 

The ramp on the tumbler  that acts on the stud is arrowed.  Notice that the half cock bent is not designed to resist a trigger pull – ergo it is not safe!  You’ll also notice if you look on this site regularly that I have got rid of most of the colour cast in these two photos – I changed 3 flourescent tubes near my photographic station to daylight tubes  – no expense spared in making your experience better!  I did buy a 50W daylight flat panel to put above the station, but left it in the shop, so that is another trip to Cambridge!

 

14th – I felt for the regular followers of this blog, having put up with my ramblings for far too long  (do I hear faint cried of Hear hear?) so I dug out an interesting pistol from the recesses of the collection I inherited from my father.   It’s French, by the well known Paris gunmaker Le Page and is a large bore percussion pistol firing superimposed charges – it has two cocks and a single bore into which two loads are placed, one after the other.  The right hand nipple leads to the front charge, and the left hand nipple leads directly to the rear charge.  It has a single trigger that releases one cock at a time – if both cocks are at full cock, the first pull fires the front charge, and the second pull the rear charge, but if only the left cock is at full cock it fires that one (corresponding to the rear charge, so it would be a bit unfortunate if it was double loaded and you accidentally cocked the left cock and didn’t cock the right!   Maybe I will take the locks out and have a look at the mechanism that achieves this and put it on the site- I’d like to see how it shoots one day, its a big bore (a 20 bore cartridge just fits into the muzzle) for a relatively light pistol and must have used a pretty small charge.  Obviously you need to get the loading dead right to make sure the flame channels line up with the charges  – I can feel a dummy loading coming on………

Anyway here it is – more in the new post ‘LePage pistol’

13TH – Sorry, no time for guns today.  Up at 5:30 to start the car boot at 6:30 – madness!   Anyway I did get rid of a fair bit of junk from the attic, and made a bit of pocket money, but still loads to go.  One booter explained to me that my cameras and lenses were too good and should be on Ebay in September when the courses in photography and art begin as they all use film cameras.  So next target is to bite the bullet and do a bit of ebaying after the holidays – to that end I got out all the kit I used for 1 hour for making an underwater video of the reaction of fish to seismic surveying in Mexico and getting it working so I could sell it – its a bit old but good and it still works…..

12th August – Quiet day – I’m doing another car boot sale tomorrow in the hope of clearing some more space in the attic – I seem to have loads of camera stuff to get rid of – including a camera from a Spitfire – a 12 Volt electric cine camera that ran at the same frame rate as the guns fired – by coincidence there was a Spitfire parked in the middle of Newmarket today – on display. It was a non-flying one without a Merlin engine, but it had apparently taken someone 30 years to make and it did look pretty convincing inside and out.  I packed up a few gun related  bits to send off – part of my current plan to get rid of all the things I don’t want to keep  – my trouble is usually that as soon as I have reluctantly parted with anything, a sudden and urgent demand drops, metaphorically speaking, through the letterbox.  A couple of years ago I dumped a load of plastic parts I’d had made for a seabed system over 10 years before, that I thought had gone out of use years ago,  The bins went at 10 o’clock in the morning and an email asking if I still had any came at 4 p.m. the same day out of the blue! – that bit of clearing out cost me a few hundred pounds.   Similarly I dumped  2 large boxes of patent reprints from about 15 years before, only to get a query re similar patents 2 days later.  My current policy is ‘ If you can easily buy another one or its junk it goes, if not , keep it).

11th August – Looking further at the theoretical loads for black powder muzzle loaders, since by Newtons law force = mass x acceleration,  to keep the acceleration constant as we increase the shot load, we need to increase the force in proportion to the shot weight, so  1 1/2 oz shot load needs 1 1/2 times the powder used for a 1 oz load  and so on.  Simple really – more or less the same powder charge for the same shot load whatever the bore size (within sensible limits – probably works for 16 to 12 bore?).   That at least is the simple theory – but we all know life is not quite like that.   The hammer of the Steven Grant of a few days ago has now been expertly welded and filed up and I got it back to engrave.  The previous botched repair had had some re-engraving done to a similar botched standard, and some of it was still extant – we didn’t file it all off as the spur of the repaired hammer was already slightly slimmer than the original – anyway, I re-engraved it as best I could in the circumstances and it now looks a reasonable match for the right hand hammer – its a real fiddle doing hammers because of the compound curves, and some cuts are almost impossible – I used my lining graver as a sort of scraper to put lines down the middle of the hammer where the spur joins the body as you can’t get a conventional graver to the correct angle to cut.   I’m happy that it looks a lot better than it did, and it is now strong enough to stand any normal use.  Its all back together now and ready to go.

 

10th August – Went for an ‘informal’ shoot at Eriswell with half a dozen of the AML gang – I decided that I was going to get to the bottom of my failure to get any of my flintlocks to go off properly fast when others could load them and get them to work well!  I took my Twigg (see Twigg puzzle) which doesn’t have a link on the mainspring or a roller frizzen but should still be reasonable, and it has always given very few misfires.  I had tried various priming powders I had, including some OB ( the AML preferred primer) that I had bought at great expense so today I tried the OB again, expecting good results, but disappointment again – then I compared my ‘OB’ with Viking’s and we realised that mine was a lot coarser, in fact not OB at all!  I don’t know how that happened, but somewhere in the supply chain I had been given the wrong stuff – probably Swiss No 1.  Anyway Viking very kindly lent me a small flask of ‘proper’ OB and lo and behold I managed to break a few clays with a flintlock – quite a breakthrough for me.   While wandering from stand to stand I got to thinking about charge sizes, as muzzle loading folk use a variety of bore sizes from 6 to 20 or so, although mostly in the range 10 to 16 bore.  We seem to more or less ignore bore size in discussing what powder charge we are using, although most of us use quite similar shot loads and, for percussion guns, similar barrel lengths.  Anyway I thought I’d try to work out a theoretical optimum based on some simple physics (that being the only sort I can do while wandering about!).   Basically, a given weight of black powder converts to a given amount of gas, so to accelerate a similar shot load to a given velocity through a similar distance the force on the wad needs to be the same.   The fixed amount of powder converts to a fixed volume of gas, which generates a pressure that is inversely proportional to the volume – and for a fixed length of barrel that is proportional to bore area.  But the force driving the fixed weight of shot down the barrel is generated by the pressure acting on the wad, and for a given velocity and shot weight the force must be the same – the force is given by the pressure times the area.  So  for a fixed powder and shot load we have pressure proportional to 1/area and force proportional to pressure times area – so the area of the bore disappears from the calculation – so theoretically we should use the same powder charge for the same shot load irrespective of bore size. which is somewhat counter intuitive!  It does ignore practical considerations like the friction of the wad on the barrel walls, and speed of burning and the buildup of pressure etc. but in principle it explains why we can all talk about that powder charge we use without specifying too carefully what bore our guns are.

9th August – A visit from a Yorkshire muzzle loader down south to visit Holts – we had a very pleasant few hours looking at some of my collection and a few he had brought with him – He had brought a cased Beaumont Adams revolver in 54 bore so I showed him my almost identical one – I have an empty case I was going to put it in so I photographed his case and label to give me something to work on.  He had a bullet mould with his that didn’t have the spiggot on the base that holds the wad on the original Adams revolvers – I don’t know when it was dropped.  I have a rather beaten up early Adams stamped 56 bore that is unusual in that the action is the mirror image of the normal action – the cylinder rotates anticlockwise and when you remove the pin it drops out on the left side – a few were made like that by Tranter – I am not sure why, possibly for left handed shooters, although it seems it would be only a slight advantage to the shooter, and a significant trouble to reverse all the parts.  My visitor brought a nice 16 bore percussion rifle with a fairly authentic looking peep sight on the back, although like my Samuel Nock rifle, the pinhole in its lowest position is much higher than the bead of the foresight, so it won’t sight at shorter ranges.   I suspect that the peep sight had been adapted to fit the gun, but whether the foresight was meant to be replaced, as I have done, or it was only shot at longer ranges isn’t clear.   I think, as I’ve said eleswhere, that these rifles were shot with quite light powder charges (1 1/2 dr) so the velocity was quite low and the drop at range would have been considerable – even so I’d think that the sights would not be much use below about 200 yards or more.   When I get our a few of my guns I always end up realising how many still have things to attend to – like finishing the locks on the Lancaster  double rifle!  And stripping and documenting and repairing the enclosed lock J R Cooper patent percussion gun.   I did venture into the workshop and made a nipple for the New Land Hanovarian conversion – it turned out that the nipple hole was a good fit for 9/32 B.S.F. for which I have taps and dies.  I always turn the nipple thread end and cut the thread and drill the bottom bit of the hole, then rough down the nipple area and part it off, then put a tapped block in the chuck and screw in the nipple and finish it off.  I stood the nipple up in the vice with lead on the jaws and filed the square – normally my filing is a bit wonky, but this one was good!  I hardened it with Blackley’s colour case hardening powder to colour it down – I probably ought to temper it a bit- I usually take them to a purple-blue if I’m going to shoot them, so they don’t fracture – I’m using EN8 steel.  It could be a bit longer and a bit fatter to hold the nipple better and so that it doesn’t come off when the cock is on the bolt, but it will do for the time being…. I don’t intend to shoot it…….

Could probably do with a bit of rusting etc!  It looks a bit new.

Cased Beaumont Adams 54 bore revolver

 

8th August – Had a couple of chaps from ‘Green Deal’ here insulating my roof for free, courtesy HM government, with 12 inches of glass wool.  When they first came to do it a couple of weeks ago they  couldn’t get through the 10 inch square loft opening so they sent a different team today who made me a nice hatch into the loft, which I had been meaning to do for years – in fact for 23 years since we moved in – and then laid the insulation!   And all free!  The only downside is that clearing the landing of books, pictures and ‘treasures’ like an original ticker tape machine and an old railway ‘train on line’ single line working indicator so they wouldn’t get covered in dust just showed up how much the decoration had got tatty since it  was done about 20 years ago.  So I suppose that is a job to be done now the place is empty…………better see if I still have the original can of paint handy!  I really think decoration should last 50 years, but it was done with distemper which is a bit fragile………  Dick had a go at sorting the hammer of the Stephen Grant (see a couple of days ago)  and it became clear that it had at some point in the past had the spur completely broken off and very badly welded back on without any penetration – hence it was so weak it eventually broke on the impact of the hammer on the firing pin.  It will be fixed properly this time!

7th August – I took some photos of a relic I saw in someone’s collection of bits and pieces on the way to be destroyed so that I could put one on this website – its an early centrefire double 12 bore to Joseph Needham’s patent 1544 of 1862 with what Cruddington describes as Rotating single bolt snap action.  The lever pivots on a shaft near the top of the action face and works a bolt that moves out from just below the  action face, giving it an advantageous leverage.  The unusual feature of Needham’s patent is that the lever has an ‘elbow’ that moves the hammer to half cock as it is depressed.  A similar ‘elbow’ fixed to the other end of the shaft cocks the left hammer to half cock.   The date of Needham’s patent indicates that it may have been made from 1862, although the gun and variations of it sold well, and the patent was also taken up by Holland and Westley Richards.  The locks are missing, but could be from before or after rebounding locks were invented around 1867….. although it hardly needs rebounding locks as the hammers are lifted out of the way before the gun is finally opened.  Shame this is all that is left of the gun….  On the subject of patents, I looked again at the Stephen Grant illustrated below with the cracked cock and noticed the action face was stamped E.C. Hodges Patent  257, the 257 being a serialisation not the patent number.  The patent is No 3113 of 1865 for a firing pin that is in line with the axis of the bore – achieved by a rather indirect coupling between the firing pin hit by the hammer, and a separate bit that fires the cap – you can’t see anything from outside.   The Grant gun does not have rebounding locks so probably dates between 1865 and about 1870 . I gather that the hammer failed due to the shock of it stopping when it hit the firing pin and the nut around it, and that it was known to have a fault.  I has now gone to be very carefully welded by our expert Jason at Speciality Welders in Haverhill.   The fun thing about these early breech loaders is that there were so many patents and variations, and  examples of many of them still exist.

Needham’s patent 3113 of 1865  –  The ‘elbow’ that lifts the breast of the hammer to half cock position can be seen on the back of the lever.  A similar elbow is fixed on the other end of the cross shaft.

The bolt is close to the action face – I’m not sure of the function of the little spring near the hinge pin.

6th August – I picked up one gun to play with at CGC yesterday – an early Stephen Grant hammer gun with Jones underlever and non rebounding locks that had a cracked cock.  The owner wanted the cock replaced with a casting because he was not convinced that a welding job would be strong enough.  The crack is at the back of the spur and so must have been caused by the gun being dropped butt first and the spur catching on something pretty solid – or some similar action, but not over enthusiastic cocking which would crack it from the front. (p.s. it cracked from the shock of hitting the  firing pin and surrounding nut as there was a fault in the metal almost fully across the spur).  In order to replace the cock with a casting, the existing cock would need to be repaired carefully to match its opposite number exactly, which would probably involve welding it back  in position.  A silicone resin cast would then be made to form a mould for a wax to be cast, the wax would then be mounted on a ‘tree’ with lots of other wax castings of other moulds, dipped repeatedly in suspensions of fireclay and sand to form a composite mould, then dried out carefully and finally heated in a furness to melt out the wax – molten steel is then poured into the near white hot ceramic mould to make the steel casting.  Some detail is inevitably lost in the three transfers  ( part to mould, mould to wax, steel to ceramic mould), and there is some shrinkage in the wax and in the steel so that the final casting is some 2 to 5% smaller than the original.   Looking at the cracked cock I am sure it can be repaired as strong as it was  originally, although I would get Jason to do the welding rather than attempt it myself to be on the safe side.  I’ll take it to Dicks when I get a chance to get his opinion, but I don’t think a casting will match the right hand cock particularly well, even if I re-engrave it carefully.

Pretty gun – It must have been quite a blow on the back of the cock, or else there was a bad defect in the metal. – Under the microscope it looks like the latter – there wasn’t much good metal holding it on, just a thin skin at the back, the rest of the break is an old fault.

5th August – One benefit of keeping this blog up to date is that when I got to CGC today to shoot I was handed a plastic bag of 16 bore cards in response to my blog that I had run out!  Thanks Bev!   I did the competition in the morning with my trusty Egg muzzle loader with mixed results, but I felt that my lesson had got me back on track as most of my misses were at tricky clays.  In the afternoon I used the Beretta hammer 20 bore, which I didn’t do too badly with, although I did realise, prompted by some recollections from Viking, that it had a pretty tight choke in both barrels (at least half choke or nearly full ) – apparently typical of Beretta hammer guns from the 1950s.  Anyway it seems to throw a pretty tight pattern compared to the typical modern 12 bore so I’ll use that as an excuse for not hitting more clays!   I think it does need the trigger pull regulated – possibly just the sear spring taken down a bit and a bit of polishing on the nose of the sear – I will consult Dick, who is much more used to modern guns than I am.  I had another look at the Lees 8 bore percussion gun that I described  earlier as a wildfowling gun, but we decided that it wasn’t heavy enough – wildfowl guns were meant to shoot large shot loads and were pretty heavy to control the resultant recoil  – this was only about 7 to 8 lbs, so was probably a live pigeon gun.  Anyway the consensus was that 3 to 3 1/2 drams of Czech powder (2 3/4 of Swiss) was plenty enough, with 1  1/8 to  1  1/2 oz. of shot.  A 12 lb wildfowling 8 to 6 bore might shoot 5 to 6 drams and 2 or 2 1/2 ox of shot if one felt brave enough.

4th August – Off at Cambridge Gun Cub all day – Martin was kindly giving me a lesson, which certainly highlighted where I was going wrong – I now need to get that embedded in my reflexes so I don’t shoot with my conscious brain!  Difficult for someone who likes to think about everything and is prone to analyse.  Very well worth it, and my little 20 bore suits me well, although Clare thought the trigger pull was a bit heavy – I’ll check it out when I can find some 20 bore snap caps.  After my lesson we entertained a party of newcomers to muzzle loading to give them a chance to try both percussion and flint  – I think I used up my entire supply of  16 bore cards so I may have to scrounge some for the regular Anglian Muzzle Loaders’ shoot tomorrow – or make some if I have time after cleaning my guns from today and making bread ( not, I hope, gunpowder or oil flavoured!).  I need to take some 1/4 BSF nipples for a fellow M/L shooter if I can find some.  I could actually do with some more myself as the nipples in my ‘working’ muzzle loading double are getting a bit mushroomed and the caps don’t fit properly – I did try to grind them a little on my fine diamond hone, so I think that will act as a holding operation!  I might have a go at making some more titanium nipples – the last ones were good, although its early days yet as they have only fired 30 or 40 shots so far.

3rd August – I had a very pleasant day cruising on the Thames on a narrow boat, and came across an amazing sight at Caversham Lock – we came up behind a convoy of amphibious vehicles waiting to go down the lock.  There was every kind of amphibious vehicle you could wish to see, from a Citroen estate car with a big outboard on the back to a number of military amphibians, in a rally from all over Europe that apparently attracted some 55 entrants.  The military vehicles included  a couple of amphibious U.S. army Jeeps circa 1939 and a couple of US Personel Carriers that looked really interesting – they had apparently been designed and made in 3 months for the Normandy landings and were intended to have an operational life of 3 weeks!  And here they were more than 70 yeas later, still in very good condition and fully functional – amazing.  I had a very interesting conversation with the organiser (from UK) about a book I remembered reading some 50 years ago called Half Safe about a chap who crossed the Atlantic in an amphibious Jeep ( in the 1950s?) with his newly acquired wife  –  according to my informant she left him as soon as her feet touched dry land, but he knew much more of the story and indeed he had the manuscripts of two further books describing his continuation round the world, which apparently have been published – I must follow them up!  I didn’t see a British DUWK amphibious vehicle amonst those waiting, but most of the vehicles/boats  had already gone through the lock.  On the shooting front, which after all is what this blog is supposed to be about, I’m off to Cambridge Gun club tomorrow for a shooting lesson to see if I can get a bit more consistency into my shooting – I’ll take my usual muzzle loader, the D Egg double with back action locks, plus my Miruku 12 bore and the Beretta 20 bore hammer gun I bought recently.  So we shall see if lessons do me any good!  I’ll report back, unless I turn out to be so bad that I want to keep quiet about it!

1st August – The year rushes on!  And I spent most of the day on the telephone with the service department trying to sort out a friend’s alarm system – I think in the end I got there….  I just had time to get back to micro-engraving this evening, so I thought I’d see  how I got on with curved letters at the 1/2 mm scale… Finding words that only have curved caps in them is difficult – you only have 2 vowels to play with , U & O, which limits vocabulary somewhat!  there are several that end in ..USS or ..OSS but I couldn’t come up with a complete sentence!  Anyway engraving curved letters is an order of magnitude more difficult than the straight line caps and I had to revert to EN8 steel to get it right – I also need a tool with an almost non-existent heel or it drags round the bends and spoils the  shape.   I can just about do 1/3 mm (13 thou) but a bit ragged!  In the end I  started to engrave round the edge of a 1 p piece, which worked out well…    Today was almost a record for visits to the site  270 so far today and 37 referrals from search engines.. I can usually see from the search words why they got to this site, but today I was left wondering how a search for ‘ oil field Bator’ on Bing directed someone to this site, maybe I’ll try myself!  – I just did and I’m none the wiser!   I am sorry that I’ll probably not be posting until Friday as I have a very busy few days and evenings….  I’ll have to think of something appropriate to engrave round the edge of my 1 p piece – a good use for what is becoming a completely useless coin.

30th July – I left at 6 a.m. to go to the car boot sale at Fulbourn- I only do them when I feel that I must clear some space in the attic  – it has to be pretty desperate for me to raise the energy, but it was, so I did!  I actually got rid of a lot of stuff in to the ‘zombies’ in the first ten minutes at the prices I wanted, and ended up taking very little home with me in the way of bulky things. So successful was it, in fact that I might have another go before long and clear out some more stuff……..   I even had a wildfowler on the stand who had a muzzle loader at home – I suggested he might look at this website, so welcome if you do!   Having another look at the New Land, I think it would improve things if I did de-rust the lockplate and the cock – I probably won’t strip the lock first – we’ll see what happens!

29th July – Today there were 5 times as many visitors attempting to hack this site as there were legitimate users!   They probably represent a few hundred warped individuals using botnets hosted on the computers (or routers) of unsuspecting  owners – there are tens of thousands of  routers in use that have a shocking vulnerability that makes them very easy to load with rogue software.  Most of them get permanently blocked from accessing this site, but it all makes work!  I finished off the New Land as far as I planned to go, but I’m now wondering if it would look better if I derusted the cock and lockplate – I will contemplate the issue!  I spent the afternoon filling the Land Cruiser with ‘stuff’ to take to a car boot sale tomorrow – not so much to make money as to get rid of clutter – I’ll probably give most of it away for a few pence  rather than bring it home!  I love the ‘zombies’ at car boot sales who descend on you the moment you arrive and want to see what you have so that they can buy anything they think they will be able to sell on for more – they almost climb into the car in their rush to uncover supposed treasures – I contemplate just having an auction on the spot and getting rid of the whole car contents in one go and leaving – the chap in the buchers’ shop suggested I might throw in my car as well, but I wouldn’t want to put potential buyers off!   So that is most of tomorrow written off!  Anyway, here is the Hanoverian New Land as of today…….

I probably ought to recover the background board!  More pics in the New Land post.

28th July – Where has the summer gone?  I lit the woodburner this evening for a bit of cheer!  The New Land is almost done – a nice sticky layer  of ‘slakum’  ( linseed oil & beeswax & driers ) is just setting up on the stock at the moment, and the barrel looks OK so I should have the finished photos tomorrow.  I spent the day struggling to get a control system to talk to the internet – frustrating… So I reverted to the mind numbing activity of trying to engrave smaller and smaller writing!   I decided that my EN8 steel is a bit soft so I changed to hard brass – usually a pig to engrave, but good for very small things.  It is difficult to do letters with curves in them, especially ‘S’s and ‘B’s so I tried a short sentence that only had straight letters – WE ALL LIVE IN A HAZE – which just about sums life up.  When I have mastered the straight line letters I’ll have a go at the curved ones, but I think I will have to come up with a more suitably shaped graver.  Here is my test piece – the scale is in 1/2 mm divisions (20 thou)  so the letter heights from the top line are  about  2/3 m.m. (26 thou),  1/2 mm  (20 thou) , 1/3 mm ( 13 thou) ,  1/4 mm (10 thou)   and 1/6th mm  (6 thou).  By the time I got to  1/6th mm I had to stop putting serifs on the letters as I was running out of magnification on the microscope (max x 25) and I didn’t have an arm steady for my right arm.  My aim is to get to 1/4 mm including curved letters but it is quite challenging!   Why bother, I hear you ask – there is no answer!

Click on the photo for a clearer view.

 

27th July – I went with Dick to deepest Norfolk to visit a fellow collector – as usual we took a few choice pieces to show and looked at some interesting guns including a little single barrel hammer  shotgun with Jones underlever engraved below the knuckle with the words ‘converted by Richards Norwich’.  We spent some time trying to work out what the conversion had been from.  It could not have been from percussion as the breech had integral lumps etc,  there was no sign of a notch for a pinfire, and the cock would have been funny if it had reached the pin, and the firing pin was obviously part of the original design.  It couldn’t have been from a rifle as there was no sign of a rear sight mount, so we were left with a change of calibre – the barrel seemed too light for good balance, and the breech seemed too thin.  We surmised that it was now a 24 bore ( there were once cartridges in that size) from the 25 stamped under the barrel between two Birmingham proof marks – we didn’t have a bore gauge.  What gauge it was before ‘conversion’ we couldn’t guess – possibly 28 bore?  Anyway it kept us amused for a while.  We also saw a fine Blunderbuss with a Forsythe scent bottle lock that had come from a Bonham’s sale – it was in near perfect condition, but not looking quite like a perfect sleeper – it had apparently been in the Holland and Holland collection in the past and I thought that it had probably ‘gone through the works’  at Holland’s at some point.  The trouble with extensive refinishing of a gun is that it leaves you wondering if it could be a complete fabrication, although in this case I think not.  I took the New Land pattern to show as it has the clever safety bolt – the main purpose of the bolt is that it blocks the cock very securely from hitting the nipple but holds it fairly close so that a cap on the nipple cannot come off but cannot be fired, even if the pistol is dropped on the cock, until the pistol is put on half cock – some way back from the bolted position – and the bolt withdrawn.  The bolt has a spring fixed within the false breech acting in one of two grooves in the underside of the bolt so that it is firmly held in the lock or the free position.  This means the pistol can be carried with a cap on the nipple and the cock let down onto the bolt in complete safety – it can then be fired without having to fumble for a cap – put it on half cock, move bolt to left, full cock fire……   Clever and safe!     Unfortunately my pistol got banged on the butt cap, which dislodged one of my repairs that I’d stuck on with superglue that had not for some reason done its job properly – I have now glued a new piece in using Araldite and used an Araldite walnut dust mix to fill in any gaps.  The barrel is still rusting but the tang nail is finished – 20 minutes in the derusting tank with the voltage reversed so it acts as a rusting tank  dulled it down enough to look OK.   It had had a going over with Blackley’s colour case hardening compound which basically makes everything look greyish.

26th  July – After a morning spent struggling with websites I thought to make the tang nail for the New Land Pattern – making screws being one of my favourite things (Julie Andrews singing in the background…….). Having established that it was about 1 B.A., and having a 1 B.A. die I went out to the outside workshop where my lathe is, to begin turning a piece of 10 mm rod to size – BUT turning the handwheel on the saddle didn’t move it, so no nail without first stripping the saddle which is a pain and I’d forgotten how it came apart… Anyway it was a 5 m.m. roll pin that had come out or sheared – I didn’t find the parts but I had some spares so it is now fixed and the screw made – first a blank with a false head as below, then make it fit and mark the lower flange with the slot alignment, cut off the top and put in the slot and finish the head ( on a grindwheel and a 240 diamond hone and a fibre wheel.  Having done that I’m not sure if the military pistols would have bothered to align the slots.  I would put up a photo of it finished but its in the cellar being rusted…. along with the breech end of the barrel –  here is an out of focus photo of the nail start – I don’t often get photos out of focus – I use manual focus, and because my camera is up high so that I can put things on the bench to photograph, I use the camera screen and magnify to get a dead sharp focus where I want it.  I almost always use around f6.3 aperture as it gives a compromise between image sharpness and depth of field, and lets me use the room lighting, or sometimes with a white LED  panel handheld to show some particular feature.  Using the screen to focus means that the reflex mirror is already up when the shutter is released, thus minimising any camera shake in case the tripod isn’t steady enough.

I had to grind the thread end a bit, as it was too long.

26th July – Had a  bit of a battle with the website as I couldn’t log on due to my having changed a file to try to stop people logging on to disrupt the site – so I suppose it served me right – but then I tied to sort it and made the site so that no-one could even look at it! Oops….   Anyway I spent some time moving files from my other WordPress websites and generally fiddling in a desperate attempt to regain entry – a case of thrashing about like a headless chicken… Anyway, as you might gather from the fact that you and I are here now, I succeeded!   I’m getting on with the New Land pattern – the stock is looking good – I’m pretty happy that it is now finished.  I made new pins to hold the trigger guard and trigger in place using lengths of an old steel knitting needle, so that leaves getting the browning on the barrel sorted where I stupidly derusted the breech area some time ago, and making a nipple for top hat military caps.  I am unsure what thread they are – since the breech block was made in Germany, it could be anything.  The metric system was first   realised in France in 1799, abandoned in 1812, and readopted in 1837, but didn’t become a true international standard until 1875.  The thread looks like 26 or 28 t.p.i – anyway finer that the 20 t.p.i. of an Enfield musket.  I think 9/32 x 26 t.p.i. will fit if I make it a bit oversize and swage it in the hole!  The only problem is that I have a plug tap in 9/32 x 26 but no die!  I keep buying odd taps and dies but never have the size I want apart from my set of UNF & UNC up to No 8.

25th July – I now know the origin of the converted New Land pattern thanks to a German follower of the blog – it was converted in Hanover  for the Hanoverian Artillery  around 1844.  see http://www.waffensammler-kuratorium.de/HannArtillerie/hannArtillerieti.html     see also on the post on this blog….  Thank you Joerg!    So now I know its an interesting pistol, not just a boring conversion I had better sort it out!   At some time I started to repair it by gluing in a new bit of wood on the butt, and re-gluing a chip the other side – but I think it was before I had much idea about these things and I got the chip a bit displaced.   There was a ragged chunk missing around the barrel bolt on the muzzle end of stock, and when I came to dig it out I found that quite a lot of the ‘wood’ was pretty weak filler – one thing I have learnt is that it is easier to repair things if you cut back to a clean surfaces with the minimum number of  faces, all flat… see teh New Land Hanovarian conversion post for more photos..

The break down the back face of the cutout bit is from the pin that held the bolt in – I guess someone pulled the bolt out too far and broke off a chunk of wood with the pin and bolt – they tried to use filler, but most fell out……. I’ve cut it all away.

 

24th Off to King’s Lynn to listen to 17 yr old nephew Ben’s composition played as part of the King’s Lynn music festival by a  professional string quartet  – amazing what the young can achieve given the opportunity.  That is why I run my club for primary school children – left completely to their own devices they (mostly aged 8 & 9) planned and put on a presentation to parents with comperes, computer presentations and live displays of their  Lego Mindstorms robotic devices.  A big problem of today’s education system is that the kids are not given the opportunity to screw something up without it being labelled as failure!    While in that part of Norfolk we visited Castle Rising castle – a splendid castle of 1140 with the usual changes and additions – mostly sadly a ruin but with a couple of rooms in the forebuilding – I always come away from places like that dreaming of reconstructing them – strictly a dream as any messing about with historic ruins is definitely a no-no in the heritage trade!  …. All that by way of saying I didn’t have time to do anything with guns!   However, my contacts in the muzzle loading shooting game continue to multiply – I had a call from  someone who wants a shootable double 10 bore – but not a heavy wildfowl gun of 12 lbs – email me if you have one for sale – see CONTACT.   Talking of lbs and inches, I guess after Brexit we will no longer be allowed to use Kg and metric measures – I bought a metric ruler today in case they become unavailable…………………………………………………..

23rd July – very heavy rain – ‘fun’ unblocking overflowing gutters!   I flashed up my furnace as I thought I’d see about a bit of aluminium casting but the element was broken so I had to stretch and install the spare which means partially disassembling the insulation bricks – still it wasn’t too bad to do and its up and running now.  In the process of finding the break I discovered that I’d got the live and neutral wires swapped at the main switch (unlike in the US, our power lines are not balanced about earth) so I put that right, it didn’t make any difference  but is inelegant. I also added a switch so I can use the P.I.D. controller to monitor the cooling temperature with its output disconnected from the heater, to save having to reset the temperature to room temp.

The number of visitors to the site, the number of  visits within the site and the number of search engine hits is rising slowly but hasn’t quite reached the heady heights of last winter!  The site gets a lot of spurious visits from ‘bots’ trying to log in – the blog is supposed to be protected from them and they can’t do anything as they  can’t find the real login entry – I’m sure the site is safe from them, but I think they may be added to the visitors count and I’m trying to work out how to avoid this.

22nd July – photo of the tap wrench below as promised. Casting around for some thing to post, I picked up an old New Land pistol that has been converted to percussion – its on my list of things to love,but hasn’t got there yet.  BUT it has a nifty safety catch that I haven’t come across before, and as I’m sure someone ‘out there’ will tell me all about it, I decided to put a some photos  on the site – for more see Post ‘New Land Pistol Conversion’

Magic tap wrench – the top part swivels +/- 90 degrees for unscrewing or screwing taps in awkward places – it will shift the toughest fittings! Top jaw is sprung.  It latches onto the nut and can be used as a ratchet with care.

New Land with plain New Land pattern lock converted to percussion with new breech block with cross bolt safety shown in ‘safe’ position

21st July  -Turns out I hadn’t finished work so I missed yesterday, except that I did pop down to Dick’s with the funny pistol I had engraved – he was pleased, which is just as well as there is no going back!  Bit like being a brain surgeon or a bomb disposal expert, but with somewhat less critical outcomes!   Actually I’ve always thought I would have been temperamentally suited to either career – probably not so, but one can always fantasize.  Anyway, enough nonsense….  I got round to fitting a new kitchen tap today – I was reminded what a fantastic tool the tap wrench is – I’ll post a picture in case anyone hasn’t met one yet.  But I did a bit of engraving too – I got back to playing with tiny engraving which involves grinding up some very small tools and trying to cut lettering in smaller and smaller sizes – I polished the tools on half micron diamond paste on a ceramic lap (horribly expensive – around £180 I seem to remember) but the finish still isn’t fantastic.  I tried engraving the EN8 plate I had annealed but it is a bit soft and the unannealed plate is better as it provides a bit more resistance to the tool.  It is relatively easy to engrave readable lettering 1/2 mm tall, and 1/3 mm is OK too – I did manage to get down to 1/4 mm – I am thinking of changing my name to get rid of the O in my surname as its the only curved letter in my usual short name, and curves are much more difficult to cut at that scale than straight lines.  No photos of that as its a bit difficult to take them.  I did manage to photograph the last of the guns I borrowed from Dick to put on the site. Its an 1853(?) French ‘ Le Faucheux a Paris’ 16 bore pinfire converted to centrefire – photo here, I’d be interested in any more info anyone has on similar guns.  (More on Post ‘French 16 bore’)

 

19th July  Almost finished my recent gainful employment so I can retire again!  I’ll have to un-retire when I do Gile’s flat, although that is taking forever to get completed as there are 7 parties in the transaction – a company selling on behalf of the executors of the previous owner, the executors, the vendor’s solicitors, Giles’s solicitors, the leaseholder and the selling agents, plus Giles!   So each iteration takes about a month to sort!   Anyway I did manage to steal the odd hour to go and finish Dick’s pistol – I’ll have to take it to him tomorrow, and see what delights he has to offer.  I have one more gun to photograph and put here when I get a moment.

 

I can see a few bits that need touching up!  Always the same when you photograph anything – you look at it with different eyes!

It does look different in the flesh as the metal is shiny  and the contrast is greater.

 

17th July – I put up a full post on the furnace for info……………….See ‘Heat Treatment Furnace’

I have almost finished the tang of ‘another one of Dick’s funny pistols’ – just got to put some structure on the raised bits, but it looks better than I expected so far…..  A few things I would do differently if I did it again, but life is like that!

16th July  Lawns today!  I did a bit more on the tang of Dick’s second funny pistol – I dread to think how many cuts it takes to do the backgrounds but I guess when its finished there will be well over 1000 cuts in the engraving – judging by the rate at which I’m having to sharpen gravers, I’ll have done about 60 and re-ground about 15 of those with broken points!  I have swapped to using the gravermax for the background lines as it keeps its edge better and is easier to avoid over-running into the raised areas.    Not sure I’ll have much time tomorrow………

15th  July – I used the furnace for the first time, annealing a piece of EN8 steel for an engraving test piece at about 900 degrees C.  I got the PID controller and wired it in and checked it – using a decent voltmeter and the tables for a K type thermocouple I reckon the controller under -reads by about 30 degrees at high temperature, and it doesn’t seem to get up to the set temperature but starts to cycle while still below it – still, with the voltmeter and tables I can set the PID controller to a temperature that gives the result I want.  Anyway it worked!  I had the piece of steel in an envelope made from stainless & titanium foil from Brownells & crimped tightly to exclude air so that I didn’t have to deal with any scale on the surface after the heat treatment  – that was a great success, there was a very light colouration on the surface of the metal – as with tempering it, but no loss of metal – definitely recommended for heat treatments above about 5 or 600 degrees C.  I wasn’t absolutely sure if the metal in the envelope really got as hot as the furnace, but it took almost on hour to get up to temperature, and I held it there for at least 20 minutes and cooled if very slowly, so I guess it did.  I must put another switch on the panel to disconnect the PID output so I can just use it as a temperature readout while it cools.  I also have a cooker control on the panel I can switch in to control the rate of cooling if necessary.   Its a really neat design – well done to the young lad who designed it – he’ll go far!

 

The two bolts sticking in the furnace bricks are blocking alternative holes for the thermocouple probe. 

I carried on with Dick’s ‘other funny gun – engraving the tang – I decided I’d experiment with a cut out background, so I came up with a design and started at the top – stages are ;- black the metal, scribe a rough design, cut outlines with a push graver, remembering that with cut backgrounds you need to make the raised bits slightly oversize and bold, then go round all the edges of the areas that will be cut out with the gravermax canted over so that you cut an almost vertical edge to the raised areas and a sloping edge to the cut areas – these cuts should be fairly deep.  Then cut out the background using closely spaced parallel cuts with a push graver – the skill is in starting close to an edge and NOT running into the raised area at the end of the cut, and keeping the cuts even.   As the graver wears down it will cut deeper and take more force to cut so you are more likely to slip at the end of the cut  – getting through the stages below needed 3 sharpenings of the gravermax graver, and 10 of the hand gravers.  I made a couple of small slips but fortunately nothing that couldn’t be burnished out with a polished carbide tool.

Outline design.

Cut edges of raised part more or less vertical

 

Cut background with closely spaced parallel lines – keep them as even and parallel as possible.  That leaves the internal detail to be done.

 

14th  July  More grappling with ‘Prior Art’ and suchlike.  I started to do the barrel and tang of Dick’s ‘funny gun No2’.  I got the rings round the breechblock done in traditional ‘fir tree’ design and put a plain border round the tang and screw hole- its a very narrow and long tang which presents a bit of a problem – its too narrow to put the ‘wiggly line and tadpoles’ on as it would leave a silly strip in the middle.  I had half an idea for the filling the space, but it involved lots of curves and I wasn’t sure if I could get the breechblock out – curves means rotating the part and with an 18 inch barrel that’s a pain  – anyway I did manage to get the breech out without using heat so that frees up the design a bit.   I have to do a practice for new designs, or if I haven’t done old ones for a while to refresh my muscle memory, and all the bits of plate I have are EN8 and not free cutting so they are difficult to cut and play havoc with the gravers – I will have to source some nice ‘soft as butter’ mild steel – most bits of the guns are better than my practice plates!  I’m sure the ones I learnt on were better or I’d never have got anywhere!   Will do some photography at the weekend and put up another gun – I have one sitting here, although its not a particularly puzzling one.

13th July  As a break from hunting patents and publications on the web I engraved the lock of ‘another funny gun’ of Dick’s to match the other borders, and invented a small motif for the tail as ordered, something a bit unusual was the order.  So the border is the wiggle with ‘tadpoles’ and I did a wreath for the motif – I did start to cross hatch it but that went wrong so I cut the surface back a bit and stippled it with the gravemaster and a slightly rounded point – it worked fairly well after a few tries – the wreath may need a cut or two to even it up, but it works OK.  We decided against putting a  spurious name on the lackplate in a fit of moral rectitude, despite the fact that its a Blackley casting!  Talking of which, I have been trying to persuade Dick that its wrong to put conjectural bits on the 1630 blunderbuss just because the owner asked him to make it look good – I was telling him that he ought to be awkward, like me.   I’m afraid I haven’t got round to photographing the next puzzle, so you will have to make do with the  JR Cooper patent (or not a patent as I believe is  the case) for tonight’s puzzle  gun.  With luck there will be a gun tomorrow – I was planning to go to Dick’s so I’ll try to hunt some more out – I don’t know how long I’ll be able to keep this up !

I haven’t tried stippling before and it took a while to get the effect even when I inked it – it probably still needs  more done to it. .

 13th July Again the puzzle has been solved by Joerg who may just have an advantage since the last two were German guns – its to a Franz Jaeger patent of 1909 or a slight variation of it and again is a known design – see post still called Weird gun. I’ll have to try to find an English gun as a puzzle – can I suggest a look at the so far unsolved puzzle of the ‘J R Cooper patent hammerless percussion shotgun’ ?  see ‘latest updates’ – I’ve bumped it up so you can find it!  The puzzle is – is this the only one made? was it ever patented?  did it work?

12th July  Yesterday’s puzzle gun was solved very quickly and turned out to be a reasonably well known German pre 1914 design  – in fact when I went back to Dick’s this afternoon and said it’s a Collath gun he dived into his junk cupboard and produced another Collath that had been sleeved and re-chambered as a 20 bore!  He also brought out about 10 other junk guns of various degrees of interest and I looked them all over with a view to giving you something more challenging – and I found an amazing gun – almost unbelievably complex and so intriguing that I bought it back to photograph.  So this is tonight’s challenge – its a double 16 bore toplever opened boxlock non ejector, with a Deeley forend catch and steel barrels without any maker’s marks or names, with the number 2812 on it.   From the outside it looks quite normal although two pins rise from the top of the action body to signify that it is cocked.   See the post ‘Weird Gun’ for what is weird about it, and drop me a comment if you can throw any light on it!  ( I hope the post name will change when I know what it is!   Here is the side view, which is fairly normal……  Oh, and the proof marks look like post 1950 East German Suhl marks…..


Apart from the cocking indicators it could be any hammerless boxlock – but see post ‘Weird gun’ to explore the weirdness!

12th July  It turns out that my ‘French 16 Bore’ is in fact a German Collath  gun – thanks to Joerg who came back pretty quickly to my post.  I conveniently found an auction description (Holts Dec 2013 Lot 965) that confirms Collard chambered guns as antiques if kept as an ornament or  curiosity – which it certainly is – so no certificate needed!   It is difficult to exaggerate the power of the internet as a source of information!  He also pointed me to a website with a host of information on Collath shotguns , rifles and drillings and their special cartridges.

11th July   The STEM club children came good and did a really smooth presentation, so that was great and justifies our ‘hands off’ approach.   I was on school matters most of the day so everything else rather went by the board!  But duty calls, so I found another treat for you – a  French breechloader without any identification.  Its a 16 bore hammerless double gun with damasus barrels with an underlever that initially moves the barrels forward away from the breech faces while leaving the extractors behind.  Once the underlever has opened 90 degrees, further motion moves the barrel further and causes  the bolt that is attached to the underside of the barrel flat to disengage from the slot beneath the breech face, allowing the barrels to fall on a small hingepin at the front of the fore-end. Dropping the barrels disengages the pin that has been holding the extractors in the backward position. The process of opening the gun also cocks it.   There is a strange safety catch in the form of a butterfly nut on the top of the breech – when it is aligned fore and aft it is in the safe position and it obstructs the sight line down the barrel – when in the fire position at right angles to the sight line you can see across the middle of it, so it is immediately obvious when you come to shoot that the safety is still on – although it would be difficult to move it from one position to the other while it was anywhere near mounted.   It has the usual continental decoration of raised design against a punched background – possibly etched before punching – rather fine when viewed under the microscope.  I would be very interested in any suggestions of a maker or patent.   The gun has sling swivels as was common on continental shotguns, and the chambers appear to be highly tapered for the first 1.5 cm, loosing at least  .5mm in diameter – I don’t have a 16 bore snap cap or cartridges to try.  As before I have started a new Post with all the pictures on it  ( French 16 bore ).

10th July – Meeting in School this morning – its going to be a very schoolful week!  Tomorrow my science and technology club ( AKA the cardboard box club, after its favourite making material) is giving a presentation to the parents of the creations they have made using Lego Mindstorms – its going to be exciting as I leave it all to them to organise and do – there is usually a bit of chaos and confusion on the day, but my take is that its all part of the learning process! Its really not because I’m too lazy to help – honest!    Anyway I finished recutting the casting for the triggerguard for Dicks other funny pistol – I noticed when I looked at the photo that there were still a few cuts to add.

9th July – Splendid day’s sailing on the Orwell in the Cornish Coble – the wind was just perfect , not too strong but pretty steady and it was hot enough to be pleasant to be out in the breeze.   I’ve done a bit more engraving on Dick’s extraordinary pistol – the butt strap is now finished and I’m starting to recut the trigger guard which is a Blackley casting – the metal is pretty tough so I’m having to use the gravermax to cut it efficiently – I can cut it with a push graver, but gravers wear and loose tips much quicker with hand engraving than with the gravermax,  its not clear to me why that should be – at least the wear bit, I can understand the points surviving  on the gravermax  as it doesn’t put such strains on the tip at the end of cuts.

The Trigger guard casting will need quite a lot of work on the surface to get it right – but its usually best to recut the engraving once, before any other action, so that you can still decifer it before it gets a nasty layer of oxide on the surface. and you can just see where the lines went.

8th July  – a day away from reading patents!  Got the boat ready for sailing tomorrow, we are missing out on our Hebridian charter this year as our crew is unavailable  so are taking every opportunity to sail the dinghy.   When I was at Dick’s last week he had got out a pistol that he started restoring many years ago from a wreck someone found in a garden shed  – it turned into one of Dick’s famous flights of imagination but never got finished – we’ve all been there, haven’t we?  He had got as far as to get Geoff Moore to engrave the trigger plate but the rest was a work in progress – only without the progress!  Anyway he got it out and asked me to complete the engraving – lock, barrel and tang, trigger guard and the butt strap with a fitting for a stock.  So here is the pistol –  I got started on the butt strap tonight, I have had to keep the same borders as Geoff Moore started – not one I’ve seen before but it will do nicely, and is quick to do – its a wiggle line with tapered cuts in the wiggles – the line is cut in one go with the gravermax (cheating!) and the side cuts by hand.   I realised how nice it was to engrave a free cutting mild steel – its like butter compared to the bit of steel I was practicing on – no wonder I break so many points off gravers.

There IS a real antique buried somewhere inside this – quite a bit of the original wood is there but with a lot of additions!

I wish I had Dick’s eye for shapes – its a totally bizarre pistol- but so elegant in a French sort of way!

Geoff doesn’t do the traditional English style, but its quite continental and suitably elaborate – quite a challenge to put my work alongside his!.

The wiggles on the right haven’t had their separate cuts added yet.   I’ll leave the rest of it plain as its part of the grip.

7th July –  I’ve got a lovely gun for you tonight in my run of early breech loaders – this one is a bit later than the Joseph Lang guns of the last two posts – it is more or less the second hammerless breechloader design to reach any market after the Murcott patent 1003 of 1871.  Its made to patent No 284  of Gibbs and Pitt  of 1873, and has  an underlever that opens the gun and cocks the tumblers (if fired) and snaps shut.  It is a double bite closure with a spring driven bolt into the lump, and has a triggerplate action.   See post for more details of this lovely gun which is in very good condition, having been lapped and reproofed at some point.   I am a bit confused –  the gun is engraved ‘Gibbs & Pitt Patent  204 Bristol’ but the patent cited by Cridington & Baker is actually No 284 – I guess the engraver got it wrong.. Anyway I’ll put the rest on the post…..

6th July – I did my 9 hours work today so I can have a few minutes for the blog!    I’ll put up the other Joseph Lang photos in a new post – its a 14 bore double centrefire gun with his second pattern closing – the bolt has got a bit further from the hinge and the lever is now wrapped round the trigger guard instead of pointing forwards – its still a single bite inert bolting system.  When I get some spare time I’ve got an engraving job to do for Dick – another of his ‘funny’ pistols he is recovering from a rather sad antique – I had a little practice of the border that Geoff Moore cut on the finial  – I need to keep more or less the same border on all the bits – I have the lockplate, the backstrap to engrave  and the trigger guard to freshen as its a raw casting.  I’ll put up some photos when I get a mo……..

5th  July  – I should be beavering away, but I escaped to see Dick and he pulled out a stream of interesting old breech loaders for me to look at – he has lots of the ones illustrated in Cruddington and Baker’s books.  I was particularly looking for Joseph Lang guns as pictures are sought, and I found on in addition to my own.  Looking through his old guns I found a number of interesting guns in odd bore sizes  – I decided that I’d borrow three that were obselete calibre – a 14 bore Lang double centrefire, a really fine  Gibbs & Hill hammerless 10 bore and a little French 14 bore.   I’ll picture them all on separate posts for simplicity – J Lang Pinfire 16 bore (mine),  J Lang 14 bore double and  Gibbs and Hill 10 bore.  so far I’ve done my own Lang ;

 

5th July  Work has kept me a bit busy the last day or two, but I haven’t forgotten my responsibilities!   I emailed a MLAGB Black Powder contributor about a 16 bore Lang pinfire I have and he would like photos for a book he is writing on Lang – so that’s another job!  I fixed the furnace but haven’t had time to use it yet.  I have now resolved to thin out my gun collection a bit, so watch the GUNS FOR SALE tag in the next few months when I get a chance to take a few photos.

2nd July – Reading papers and patents today – boring so I went and cleaned and sanded the gunwales of the boat and fixed up the graphite crucible in my furnace, but the element broke and I had to take it to pieces to fix it.  I was hoping to melt some metal  for fun.

1 July  –  In a rare spare moment I drifted back to the engraving – the test plate I have is slightly hard – EN8 or somesuch – and is a bit difficult to work with hand tools so I tried the Gravermax pneumatic graver – it would be much easier if I could control it better, but at times it decides its going to cut very deep lines and at other times it behaves better – practice, practice, practice…….   One good feature is that it isn’t so prone to breaking off the points – I find that cutting out the background is a sure way to take the tips off the hand gravers!

30th June  – Another month gone – we have probably had the best of the summer already!   I’m afraid that I’m not going to have a lot of time to play with gun restoration  in the next two or three weeks as  I have a deadline to do the consultancy work I just took on, which will keep me busy for most of the time.  I did manage to play with the furnace before I got the brief for the job sorted out – I put an ordinary  cooker control  in parallel with the digital temperature controller so that I could use the control to set the temperature with the digital control cutting in if the temperature fell.  I got more stable control, but of course I had to do some fiddling to set the desired temperature.  I think these problems will disappear with the proper PID controller .  P I D stands for Proportional Integral Derivative, which means that it anticipates as it gets close to the desired temperature and turns down the power so that it doesn’t overshoot.  I’m struck by how overpowered the furnace is once it has heated through so it really needs the PID. Mine is on the way from China!

29th June – a lazy day – I felt like doing a bit of engraving and I’d taken a few photos of a modern gun Dick was making that had been engraved by Geoff Moore, so I thought I’d try imitating his design, but I just made a horrible mess of it – I’ll have to spend time with paper and pencil to get the style right first.  I wired up a cheap 400 degree temperature controller on the furnace and tried it out, but its a cheap on-off controller not a P.I.D. and it overshoots horribly – going about 25 degrees over the set temperature after it turns off and then undershooting by 5 degrees before it comes back on.  I guess a solid object in the furnace would be more stable due to its thermal inertia.   It now looks as if I’m in for a busy summer as in addition to renovating Giles’ flat – whenever that completes – I am in danger of coming out of my third retirement in 16 years and being a consultant again – just when I thought I could ditch my VAT registration too.  Back to planes and suits if I’m not careful – its unfortunate that I can’t resist it when people come knocking on my door with interesting projects!  I ought to practice sitting in front of a mirror and saying ‘NO’ but its too late in this case.  Maybe it will fund a nice cased pair of small flintlock pistols like the ones I stupidly failed to buy at Bonhams last sale ……………….

I’m NOT going to show my attempts to imitate this!

28th June – Dick & I went to look round the J W Evans die-sinking and stamping works in Birmingham, which was in operation from about 1850s (?) to 1990 and has everything still in place including thousands of dies and stamped parts.   The works produced all the stamped metal parts that were hard soldered together to make fancy Victorian and 20th century silver plated tableware and other decorative household items.  J W Evans output was  the completed object ready for plating, or, in the case of a small fraction of the output made of solid silver or gold, ready for proof marking.   The dies (female part) were cut in a steel block and the corresponding male part was cast in a relatively low melting point metal directly into the die.  The cast part was then fettled to allow for the thickness of the metal.  Very interesting trip – the works/museum is run by English Heritage and is for prebooked visits only – I could have done with a bit more specific information – e.g. what metal alloys were used for the stampings and the male mould part, but a good effort. Horrible journey there as the A14 was closed and we got sent all round the county but we arrived only 1 minute late for our slot and miraculously found a 2 hour parking space right outside the door – how unusual is that!    When I got back I did a bit of touching up on the brass bits of the little turnoff pistol that I had engraved, now that Dick has fitted the two bits together.

27th June – Another session of the STEM club for children – we are still struggling with the Mindstorms software despite most of  a lifetime spent computing – it is a pig!  Anyway not much happened today on the gun front and I have to turn in early as Dick and I are off on a visit to J W Evans old silvesmiths workshop in Birmingham, courtesy of English Heritage.  Not looking forward to the rush hour drive on the A14!   And on Monday I seem to have agreed to go to London.  Life was much more stable and peaceful when I had a regular job, at least I knew where I was going to be from day to day and didn’t need a diary to rule my life!

26th June – A bit more work making a panel to mount the control electrics for the furnace – I ordered a P I D temperature controller from Amazon but failed to notice that it won’t be delivered until mid July – I didn’t think Amazon did that sort of nonsense – one lives and learns!   A well as refitting Gile’s flat, which seems to be on the horizon for  a six week spell I seem to have got involved in another consulting job in the U.S. – I wonder how many times I can retire!  I had come to the conclusion that  in my activities the only noticeable difference between ‘retirement’ and work is that I get paid for one and not the other!  Ah well, my idea of hell is playing golf, so I suppose I’m on the right lines!  But I would like time to take the Samuel Nock rifle to the range again!

25th June – I made a steel ‘crucible’ for the furnace out of an empty disposable oxygen cylinder from my small oxy-gas set, with suspension points and a loop to tip it.  I’ll post pictures later.   I fitted the top closely and made a tube to hold the thermocouple  so it is all now Ok and ready to get the electronic controller working. I did another run, recording the thermocouple voltage at intervals so I can plot the rate of rise of temperature and get some idea of  what the input power is in relation to the heat loss.  I picked up the wrong thermocouple data and couldn’t understand why it was taking so long to get hot – it crawled up to a calculated 600 degrees so I had a look through my peephole and realised that it was actually above 1000C  – at that point I realised my mistake and turned it off- since I had the raw data no harm was done!  From the plot of actual  temperature against time  you can see that the furnace has plenty of spare power – the curve is actually a bit odd but I’m sure I measured it correctly!  Anyway it looks as it will do everything I want including melting brass.   From the graph below I calculate that there is about 30% more power input at 1000C  than needed to maintain the temperature.     My mind is wandering off on the design of a slightly bigger front opening furnace with a bit more power, say 8 inch cube interior instead of 4 x 4 x 8 vertical – I reckon it would still work off a 13 Amp socket and reach 1100C.

I didn’t expect the rise above 600 degrees to follow such a straight line!  Peak temp is about 1087 C

24th June – I finished making and TIG welding the two frames that hold the furnace together and put some 10 m.m. studding legs on the bottom frame to hold a couple of half thickness bricks as a floor.  The whole thing has gone together pretty well so far – the Youtube design is well thought out by the author who says in the video that he is doing his GCSEs  – so he is presumably still at school –  a highly commendable effort.  I deviated somewhat in my construction as I wanted to use up scrap materials I had around the workshop – which included a lot of M10 studding amd M10 nuts.  I  found a bag of 10 mm. Belville washers – they are the dished washers that act as a spring – I used them with the nuts that hold the bottm bricks in place – as I didn’t have any M10 washers I used two Belville washers facing each other.     I found some high temperature wire I had saved from the inside of an old electric cooker and used that to do the wiring.   This evening I finished the main parts of the furnace, but need to do a bit of shaping around the top opening to get rid of some 1 to 2 m.m.gaps that are letting heat out – it probably needs a proper lid.   I did a test run with a temporary top in place, and the temperature gradually climbed over half an hour to almost 1000C !   The outside got a bit warm and the aluminium plate that holds the bottom bricks in place also got quite hot.  Anyway 1000 C is not bad, and the temperature was still rising

The frames are earthed, as they should be. The furness will shortly be controlled by a P.I.D.  (Proportional, Integrated, Deririvative) controller if I can get one covering the temperature range – otherwise I’ll just use a cooker control with its simple on/off regime.

23rd June – Clearing out my ‘rough’ workshop left the big bench empty so an invitation to start a project I’ve had in mind for some time – a simple electric furnace, primarily for annealing and hardening, but alse possibly for colour case hardening and maybe brass casting.  The design comes directly from a Youtube video  (How to Make an Electric Foundry For Metal Casting – Part 1)  , so I can’t claim any credit for what is a very elegant little vertical furnace.   It uses bits from ebay – the most expensive part being the silica kiln bricks – 10 bricks at £26.00 for 5 inc. carriage.  The heating element is a length of heating element from ebay – there are lots on offer, mostly from China, but I found one with next day delivery for a few pounds.  I won’t go into the details as the video is comprehensive, but so far I’ve grooved the 4 main bricks for the element- they are very soft and fragile, and stretched and checked the element – its around 1.6KW, I had to cut around 200mm from the length to get the correct heating effect, and ended up with about 67 inches which equates to around 4 complete turns within the four brick enclosure.  I bought a K type thermocouple from ebay for a few pounds – using a simple testmeter on the milliVolt range enables me to measure the temperature to within about 10 degrees – I put the 4 bricks together on another couple of bricks for insulation and fired it up with the thermocouple suspended in the middle and a couple of bricks on top and in less than ten minutes it had got to about 530 degrees Celsius – I didn’t bother to leave it longer as the corners are not very tight and have gaps at the ends of the grooves so there is quite a lot of heat loss that will disappear when the extra bricks are used to fill in the corners.  I now need to cut the bricks for the corners and base etc and make a metal frame to keep it all together – I have some old Dexion angles that I’ll probably use as it will help clear some ‘junk’ from the workshop – thus killing two birds with one stone ( I’m not sure if the RSPCA prosecutes anyone who uses that saying – I think I’m safe as I understand they have seen the error of their ways and stopped being so litigatious – they are in a bit of a mess at the moment and the Charity Commission has put in its people!).  I have a temperature controller that I will fit, but it needs a bit of fiddling as its meant for a K type thermocouple but only goes up to 400C so it will have to be ‘doctored’………..

The maximum temperature will depend on the insulation and I’m not sure that the elements will be good for much above 800 C.

The corners need filling in and a proper bottom shaped and the whole lot held in a frame welded from Dexion angle.

22nd June  –  My evening reading lately has been Cruddinton and Baker’s books on the British Shotgun – all 3 volumes.  I am getting interested in old breech loaders in spite of my earlier resolution not to get involved in anything later than percussion, except for the odd modern over and under.  Dick came up with an old hammer gun – a rather nice bar in wood to  Smith’s patent with rebounding locks and a single bite snap action closure with a lever on the right side of the lock – it looks in excellent condition and is having a few bits of the wood repaired – it looks as if it was reproofed after 1955 as its stamped with BNP and 12 x65 on the underside of the barrel.  It has a very fine damascus barrel.  I guess this is the 1863 patent of J Smith although the opening lever doesn’t seem quite the same as the description in Cruddington and Baker.  I’ll have to get a copy of the original patents from the British Library.   I gather the gun is probably for sale, so if its within my budget (very low!) I may be interested in adding it to my growing collection of breech loaders! I’ll try to get some pictures.   I didn’t watch the Holt’s Auction live as I was trying to get my outboard motor running ( it took 4 hours but its now good!) but it looks as if the auctioneers had a tough job getting the punters going – I don’t think I’ve seen so many unsold lots in a Holt’s sale before, and many lots sold a few bids up from the bottom estimate.  There were one or two that beat the top estimate, but the best percussion shotguns – the Blissett and the pair of Beaties didn’t find a buyer.  Several lots were knocked down at below the lowest estimate, which is not something you see often at Holts.  I don’t know if the market is in a sulk over brexit, or the extreme heat of the viewing days kept people away. The ‘Manton’ I mentioned at 200 to 300 went for 340 hammer price, that’s around £440 to pay, which is probably a fair price – If I’d tidied it up I’d probably sell it at £550 – £600 but the next bid up on 340 would have been a bit close to the bone.   Anyway not sorry I didn’t bother to bid, but it would have been interesting to have watched a bit of the action.  One cheering outcome is that our Heavy Dragoon ( see Guns & bits for sale) is something of a bargain at £1200 – hurry before we think better of it and up the price  – 1 went for £1000 + 300 and one for £1200 + 400.

21 st June – back from an exhausting day in London at the Holt’s viewing.   Not sure what to make of the guns – there were a few really fine muzzle loaders if you have a lot of dosh – the pair of Beaties were very fine, as they should be at those sort of prices, and there was a nice Blissett but a lot of the less good percussion and flintlock guns have low estimates on them – I am in two minds whether to bid on a couple of items or go shooting instead! Difficult call!  – There were one of two cheap percussion guns that might possibly make shooters with a bit of cleaning up e.g lot 516, the (possibly spuriously signed) ‘Manton’ at £200 -300 estimate ( that’s £260 to £390 cost), but I don’t really have time to do it, so I guess I will stand back!  Nothing like as inviting as the Bonham’s recent sale in spite of the much greater volume!   I din’t manage to find a single wooden antique gun case or anything else that really took my fancy.  The sheer volume of stuff is overwhelming – the sealed bid sale for July has a pile, literally, of repro percussion revolvers, mostly in good condition that have to be on a F.A.C. so not to be bought on a whim- where will they all go?   I guess for a collector of percussion rifles there might be more joy in the sale – one or two very nice offerings.  As usual side by side non ejector shotguns by lesser makers can be had for a song – but a bit more expensive than Southams where many fetched only £5.     But I think overall I’ll keep my hands in my pockets!  It will be interesting to see what things go for but I have too much on to watch it on the web.

20th June – I don’t seem to have time to catch my breath these days, but I’m off to Holts viewing tomorrow to see what is happening to the market and meet up with friends.   It seems there is a widening gap between good antiques and the indifferent stuff –  good percussion shotguns are becoming more popular as the prices of fine flintlocks disappear over the horizon, and a decent gun by a good middling  maker  might make two to three thousand – and that is the hammer price!   I was having a look at Holts selling commission, but their terms and conditions seems very coy about it!  I have decided to pass on my almost new Pedesoli modern reproduction  Mortimer  12 bore flintlock shotgun as I have a single ‘Twigg’. – I’m told its a fairly early one, but in mint condition – I doubt its fired much above a couple of dozen shots  – it is of course a section 2 firearm and must be on a shotgun license  – offers around £750 if you want it…..  I’ll put it on the website later.      I was going to deliver a gun to someone at Holts, but I don’t think I want to be wandering around London with a gun in a slip, things being what they are!  Discretion and all that – it will have to wait……..  I’ll follow up the Holts sale with a trip to Birmingham arms fair on Saturday to see what goes there – I’m suspicious that there are one or two dealers who seem to shut guncases when I approach their stands – I can’t imagine why…………….As the Gilbert and Sullivan Opera goes…. ‘I have a little list’  – its growing!

I noticed there was a ‘Samuel Nock’ in Holts without a name on the lock and with the barrel name ‘recut’ – I shall be interested to see if its as bogus as the photo suggested – but then I am on old cynic !!

18th June – I’m sorry I missed posting yesterday – driving to Rugby and back without aircon and being out all day in the heat left just enough energy to clean my gun when I got home!  I got a taste of things to come today as son Giles is buying a flat that needs complete renovation and muggins has volunteered, so today was a trip to IKEA in Milton Keynes to look at kitchen units – and another 3 hours of driving without aircon – the car showed 31.5 C so another ‘boil in the bag’ experience!  I took some videos at the helice to see how easy it was to track shot – helice is not the best discipline to try the experiment on because you don’t know there the hit will be so need to keep a wide field and thus a rather low resolution, and you need to be fairly well in line with the gun which put you directly in line with the smoke with muzzle loaders – plus a lot of shots are with the bird not rising above the horizon – I managed one shot where you could see the shot going away after the impact, but the impact itself was obscured by smoke – so not much use. I haven’t looked at all the many videos yet but I’m not hopeful – the rabbit one I did previously was much easier as I knew where the impact would be, and it was shot with a breech loader so no smoke.  I’ll have to set up a better trial of airbourne shots!  I took a number of photos of shooting, but didn’t manage to get any of the moment of firing!

Continue reading »